WireTech 5000P-10x Bedienungsanleitung PDF herunterladen (Seite 10)

(1) Input Setup Set input parameters

(2) Output Setup Set output parameters

(3) System Set system parameters

(4) Ethernet(optional) Set Ethernet parameters

Note: Ethernet under Main Menu only appears if the unit is a Gigabit model.

5.1 Inputs Menu

There are four options: Status, DVB-S2, RSSI and Ethernet (optional):

Note: Ethernet under Inputs Menu only appears if the unit is a Megabit model.

5.1.1 Status Menu

It contains four options, ASI1, ASI2, TUNER and IP IN, to show the status of signal

input:

ASI1: When signal from ASI1 input port is locked, it will display package format and

code rate; if signal is not locked, it will show Unlock.

ASI2: When signal from ASI2 input port is locked, it will display package format and

code rate; if signal is not locked, it will show Unlock.

TUNER: When signal from tuner input port is locked, it will display package format and

code rate; if signal is not locked, it will show Unlock.

IP IN: When signal from IP input port is locked, it will display package format and code

rate; if signal is not locked, it will show Unlock.(Note: this option only appears when set the

External Function as “IP IN”. Please refer to section 5.3.6 for setting method)

5.1.2 DVB-S2 Menu

There are 6 options to set DVB-S2 parameters. After signal is locked, the TUNER

Inputs

Status

DVB-S2

Ethernet

RSSI

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Keine Kommentare

WireTech 5000P-10x Bedienungsanleitung Seite 10